Boating & Watersports Accessories
Ditch the Ropes and Knots: A Guide to Mission Outdoor's Boat Fenders
If you've ever fumbled with a fender line while trying to dock in a crosswind, you already know the problem Mission Outdoor set out to solve. Traditional "sausage" fenders require constant retying, they roll out of position, and they leave black scuff marks on your hull the second you look away. The Mission Outdoor lineup at The Parts Lodge takes a completely different approach — no knots, no dangling lines, and no more babysitting your fenders every time you pull up to the dock.
Here's a rundown of all four fenders in the collection, so you can match the right one to your boat.
Mission Sentry 2.0 Boat Fenders
$158.00
The Sentry 2.0 is built for boat owners who are done fighting with fender height. Instead of tying and retying rope, Sentry uses an enhanced LockCAM™ strap system — press the lever, slide the fender to the height you need, and release to lock it in place. Once secured, it conforms to your hull and protects both above and below the rub rail without shifting or rolling.
- Size
- 22" x 9" x 5.5"
- Material
- Patented, ultra-durable closed-cell foam that resists marking
- Colors
- Obsidian Black, Storm, Race Red, Aquamarine, Crisp White
- Includes
- Two (2) Sentry 2.0 fenders with built-in strap and LockCAM™ attachment
If you want a fender that goes on fast, stays put in rough water, and comes in a color that actually matches your boat, Sentry 2.0 is the workhorse of the lineup.
Shop Sentry 2.0 →Mission Maven Pontoon Fenders
$169.00
Pontoon owners have a unique problem: standard fenders just don't fit the flat rail and fence design of a toon. Maven was purpose-built to solve that. It uses a strap, clip, and lip mechanism that clips onto a standard 1¼" top rail and tucks under the rub rail gap — deploying in seconds with no ropes required.
- Size
- 25½" x 10" x 6¾", 2 lbs 6 oz
- Material
- Patented non-marking, UV-resistant foam
- Colors
- Obsidian Black, Deep Blue, Burgundy
- Includes
- Two (2) Maven fenders with built-in strap and clip system
- Fit note
- Requires a standard 1¼" top rail and a standard gap under the rub rail — not currently compatible with some pontoon models, including Barletta and Bentley
One thing worth calling out: Maven isn't meant to stay attached while underway (no fender is). But because it deploys and stows so quickly, it's actually easy to pull off and store in a seat compartment once you leave the dock — which solves the classic "dangling fender" look a lot of pontoon owners get stuck with.
Shop Maven →Mission Ronin PWC Fenders
$119.00
Jet skis and other personal watercraft need protection too, and Ronin is built specifically for that job. Its compact profile makes it easy to store, and the same non-marking, UV-resistant closed-cell foam used across the Mission lineup keeps your PWC's finish protected. The integrated strap and clip system — Mission calls it the DRYLINE™ attachment — clips onto your PWC's rub rail with no knots and stays locked in place even in choppy water.
- Size
- 16" x 7¾" x 5¼", 12 oz
- Compatibility
- Fits most major PWC brands, including Jet Ski®, Sea-Doo®, and WaveRunner®
- Colors
- Obsidian Black, Risk Averse Grey, Rush Orange, Aquamarine
- Includes
- Two (2) Ronin fenders with built-in strap and clip attachment
Mission Icon Boat & Dock Fenders
$79.00
Icon is the most budget-friendly and versatile piece in the collection, and it's built to do double duty — use it as a boat fender or a dock bumper. Instead of the classic round or sausage shape that rolls around and marks your hull, Icon uses a pyramid profile that resists rolling and holds its position. It's made from XL EXTRALIGHT® closed-cell foam, so it's lightweight, non-marking, non-staining, waterproof, and fade-resistant.
- Size
- 18" long x 7" wide x 4.5" thick
- Includes
- Two (2) Icon fenders and two (2) 6-foot fender lines
Which Mission Fender Is Right for You?
- Traditional powerboat, need quick height-adjustable protection? Go with Sentry 2.0.
- Own a pontoon and want to stop dealing with dangling fenders? Maven is designed exactly for your rail setup.
- Riding a Jet Ski, Sea-Doo, or WaveRunner? Ronin is sized and shaped for PWCs.
- Want an affordable, do-it-all fender for the boat or the dock itself? Icon covers both bases.
All four fenders share the same DNA: durable, non-marking closed-cell foam, quick no-knot attachment systems, and a clean, modern profile that looks a lot better than a rope-tied sausage fender hanging off your rail. Whatever you're running, there's a Mission fender in this lineup built to protect it.